Jumat, 15 Januari 2016

Sensor jarak Ultrasonik US-100


Sensor jarak Ultrasonik US-100
Harga : Rp. 85.000,-

Belum termasuk ongkir

This module is improved, the module itself has temperature compensation, the accuracy of the highest module now clean out treasure, absolute stable, economical, practical

20 * 45 mm module circuit 15 mm thick
  
  1. stable performance, measure distance accurate: 
    • Can SRF05 and abroad, such as SRF02 ultrasonic ranging module comparable. Module high precision, blind area (2 cm) super close, stable is the product range to the market success of powerful according to!
  2. main technical parameters:
    • the use of voltage: DC5V
    • the static current: less than 2 mA
    • level output: high 5 V
    • level output: bottom 0 V
    • induction Angle: no more than 15 degrees
    • detection range: 2 cm-450 cm
    • high precision: up to 3 mm
  3.     The wiring way:
    • VCC, trig (control terminals), echo (receiver), GND
  4. Method of use:
    •  control mouth hair a 10 US above the high level, can wait for high level output receiver mouth. A has an output can open timer time, when the mouth into a low power can be read at ordinary times timer values, where you for the ranging time, can calculate the distance. This will continue the cycle, can reach you move measurement value ~ ~
  5. Module working principle:
    • the IO trigger ranging, to at least 10 us high level signal
    • module automatically send eight 40 KHZ of square wave, automatic testing if it has any signals return;
    • a signal to return to, through the IO output top level, the duration of the high level is from the launch ultrasonic returned to time. Test distance = (high level time * sound velocity (340 M/S)) / 2;

US-100 ultrasonic ranging module can realize 2 cm ~ 4.5 m non-contact ranging function, with a 2.4 ~ 5.5 V of wide voltage input range, static power consumption less than 2 mA, bring their own temperature sensor calibration on the ranging results, and has GPIO, serial

Sensor jarak Ultrasonik SRF05


Sensor jarak Ultrasonik SRF05
Harga : Rp. 60.000,-

Belum termasuk ongkir

Description:

Voltage: DC5V
Static current: less than 2mA

Output Level: High 5V
level output: the end of 0V
Sensor angle: not more than 15 degrees
Detection distance: 2cm-450cm


Sensor jarak Ultrasonik SR04


Sensor jarak Ultrasonik SR04

Harga : Rp. 50.000,-
Belum termasuk ongkir

Deskripsi:
Sensori ini merupakan sebuah device transmitter dan receiver ultrasonik dalam 1 paket yang dapat membaca jarak dengan prinsip sonar. Transmiter memancarkan sinyal ultrasonik yang berbentuk pulsa, kemudian jika didepan sensor ada objek padat, maka akan terpantuk kembali dan diterima oleh receiver. Receiver membaca lebar pulsa yang dibantulkan objek dan selisih waktu pemancaran, dengan demikian jarak didepan objek akan diketahui. Cocok untuk pembuatan mobile robot atau home security karena bisa digunakan untuk mengindikasikan adanya gerakan.

Parameter:
Tegangan kerja DC 5 V 
Konsumsi arus 15mA 
Frekuensi kerja 40 KHz 
Jarak Maksimal 4m 
Jarak Minimal 2cm 
Pengukur sudut 15 Derataj
Triger pulsa 10uS TTL
Ukuran 45*20*15mm 

Pengkabelan:
5V Supply 
Trigger Pulse Input 
Echo Pulse Output 
0V Ground


Link Referensi: http://www.instructables.com/id/Simple-Arduino-and-HC-SR04-Example/?ALLSTEPS

Jumat, 11 Desember 2015

Strain Gauge Pressure Sensor - LoadCell 50kg

Strain Gauge Pressure Sensor - LoadCell 50kg
Harga Rp. 55.000,-
Belum termasuk ongkir

Deskripsi :
Range (kg) 50
Comprehensive error (% F.S) 0.2
Rated output temperature drift (% F.S/10 ) 0.15
Sensitivity (mv / v) 0.9 0.1
Zero output (mV / V) 0.3
Nonlinearity (% F.S) 0.2
Input resistance () 1000 50
Repeatability (% F.S) 0.1
Output resistance () 1000 50
Hysteresis (% F.S) 0.2
Insulation Resistance (M) 2000 (100VDC)
Creep (% F.S/3min) 0.1
Recommended excitation voltage (V) 5 ~ 10
Zero drift (% F.S/1min) 0.1
Operating temperature range () -10 To +50
Zero temperature drift (% F.S/10 ) 0.2
Overload (% F.S) 150

http://www.instructables.com/id/Arduino-Load-Cell-Scale/

Resistive Strain Gauge - LoadCell 350 ohm

Resistive Strain Gauge - LoadCell 350 ohm
Harga Rp. 45.000,-
Belum termasuk ongkir

Deskripsi :
The high-precision resistive strain gauge full bridge strain gauge GAGE for pressure load cell 350 ohm

Sensor Api - Infrared Receiver 5 channel

Sensor Api - Infrared Receiver 5 channel
Harga Rp. 125.000,-
Belum termasuk ongkir

Deskripsi :
1. using Rd flame sensor design, wide detection range ( detection range of common single flame sensors in about 30 Derajat, as the distance increases, the range decreases, the product detection range greater than 120 Derajat )
2. can output a digital signal (high and low), easy-to-use 
3. can output an analog signal (voltage signal) can be more precise measurement signal, for high precision occasions 
4. five outputs all have a status indicator , so whether or debugging is in practice have brought great convenience 
5. digital outputs adjustable detection range , the analog output sensitivity adjustable , design flexibility 
6. using 1% resistor design ( available in the market are made of flame sensor resistance design 5% ), the signal output is more accurate, demand for high-precision measurement occasions 
7. onboard three M3 mounting holes for easy installation 
8. 3.3V-9V power supply, compatible with most of the SCM system 
9. mounted devices all using SMT automatic welding process , Military quality trustworthy

working principle:
This product can detect the wavelength range emitted flames were near infrared 700-1100 nm of shortwave (SW-NIR), output by the electric signal (voltage signal)

Sensor Api - Infrared Receiver 1 channel

Sensor Api - Infrared Receiver 1 channel
Harga Rp. 40.000,-
Belum termasuk ongkir

Deskripsi :
Module Features:
1, you can detect a flame or a wavelength within the 760 nm to 1100 nm range of the light source, the test flame lighter distance 80cm, for the greater flame, farther test distance 
of about 2, detection angle of 60 degrees, particularly sensitive to flame photometry 
3, sensitivity adjustable (shown in blue digital potentiometer adjustment)
4, the comparator output signal clean, good waveform, driving ability, more than 15mA 
5, with adjustable precision potentiometer sensitivity adjustment 
6, the working voltage of 3.3V-5V 
7, Output form: DO digital switching output (0 and 1) and AO analog voltage output 
8, a fixing bolt hole, easy installation 
9, small plates PCB Size: 3.2 cm x 1.4cm 
10, using a wide voltage comparator LM393

Wiring Product Description:
1, VCC positive power supply 3.3-5V
2, GND power supply is negative
3, DO TTL switching signal output

Module for use:
1, the flame sensor to the flame of the most sensitive to ordinary light is also a reaction, usually used as a flame alarm purposes. 
2, a small plate output interface can be directly connected to the microcontroller IO port 
3, the sensor and the flame to maintain a certain distance, so as not to damage the temperature sensor, the flame of a lighter test distance of 80cm, to the flame, the more distant the test distance 
4, a small plate simulation output mode and the AD conversion process, can achieve higher accuracy 
5, when the sensor detects a flame, sunlight, or infrared light, to reach the threshold set by the potentiometer, the green indicator will light, DO and output low level (about 0-0.1V), the green light is not on, then DO high output voltage of about 3v